Silent Hill: Townfall X-Ray Guide — How to Take Skull and Chest X-Rays

While progressing through the medical center, Zoe will be asked by Dr. Glenn to X-ray the patient. It seems simple at first, but the machine requires you to correctly set the scan site, voltage, current, and exposure time, then precisely position the camera over the right part of the body. In this guide, we'll explain how to configure the X-ray machine in Silent Hill: Townfall, take X-rays of the skull and chest, and what to do with the results afterward.

How to Enter the X-Ray Room

The X-ray room is behind a locked door with a keypad. Enter the code: 7103. Once inside, turn on the Zeimann X-ray machine and the computer next to the patient.

Image unavailable

If you want to work out the settings yourself, open the X-Ray Dosage Table on the computer. It lists the required parameters for different parts of the body, including the skull and chest.

How to Take the Skull X-Ray

Dr. Glenn will first ask you to examine the patient's head. Approach the X-ray machine and use the following settings:

• Site — Skull;
• kV — 3;
• mA — 7;
• Time — 1.

Don't press the green button yet. Correct values alone aren't enough — you also need to position the X-ray rig properly. Return to the computer next to the patient. Use it to move the scanning area upward until it is positioned over the patient's head. You'll see corner markers on the monitor and corresponding white markers around the patient's head. Line them up as precisely as possible. If the frame is too high, too low, or shifted to the side, the machine won't take the required X-ray.Once the scanning area is aligned correctly, return to the X-ray machine and press the green button. After the scan, Dr. Glenn will contact Zoe and ask for a second X-ray, this time of the patient's chest.

How to Take the Chest X-Ray

This time, you need to change all of the machine settings.Set them to:

• Site — Chest;
• kV — 7;
• mA — 3;
• Time — 1.2.

Return to the computer and move the scanning area lower. Use the raised section of the sheet around the patient's chest as a visual reference. Just like before, line up the corner markers on the screen with the white markers on the patient. Once everything is aligned correctly, return to the machine and press the green button.

What to Do with the X-Rays

After completing both scans, collect the finished Head and Chest X-Rays from the printer. Take them to the light box next to the intercom and place them on it. You can then examine the images and discuss the results with Dr. Glenn.

Image unavailable

After the conversation, the next stage of the objective begins. Zoe will need to find three medications:

• Hydroxalene;
• Tensobromide;
• Dextracylate.

What to Do If the X-Ray Machine Doesn't Work

If pressing the green button doesn't produce the required result, check the settings first. For the skull, they should be 3 / 7 / 1, while the chest requires 7 / 3 / 1.2.Then check the camera view again. Even with the correct settings, the machine won't complete the required scan if the scanning area is positioned incorrectly. Use the patient's white markers and the corner markers on the monitor as your reference points. Once they line up, return to the machine and start the scan.``` :chatgpt-content-reference{index="0"}